Three Phase Induction Motors 415V
Monarch GX 415V
- Wide range of low voltage options ranging 0.55kW to 500kW
- Cast iron construction with top mounted terminal box
- Electro zinc plated for better corrosion resistance
- Meets AS1359.5 Minimum Efficiency
Description
Monarch Three Phase Induction Motors from TECO are a range of high quality, Totally Enclosed Fan Cooled (IC411), squirrel cage induction motors, designed, manufactured and tested to the latest International and Australian Standards.
Monarch Three Phase Induction Motors feature a metric frame motor to AS1359, AS / CENELEC HD231 frame allocation (some motors also to AS/BS frame allocations), 380~415 Volts 3 Phase 50 Hz and class F insulation with a Class B temperature rise.
Altitude
Designed for operation at an altitude up to 1000 metres above sea level.
Ambient
Designed to operate in ambient conditions of -20°C to +40°C as standard.
Finish
Colour Teal T63 to AS2700. All castings are mechanically cleaned and degreased. Two finish coats of matt acrylic resin are applied providing a high corrosion protected surface.
Balance
Rotors are dynamically balanced with a half key to Class N or better, in accordance with AS1359.114.
Direction of rotation
Standard rotation is clockwise when viewed from the drive end with the terminal markings corresponding to incoming line markings.
Electric Supply
Stock motors are designed for operation on a 380~415 Volt 3 phase 50 Hz supply and are also suitable for a 440~480 Volt 3 phase 60 Hz supply.
Motors 3 kW and below
380 - 415 Volt 50 Hz STAR connected and may also be reconnected to 240 Volt 3 phase 50 Hz DELTA configuration for use with single phase input Variable Speed Drives.
Motors 4 kW and larger
380 - 415 Volt 50 Hz DELTA connected. Motors can be manufactured for supply systems of up to 1100 Volts, 50 or 60 Hz on a factory made to order basis or by local rewind / wind.
Performance Standard
table B2
Protection rating
IP55
Duty rating
maximum continuous duty rating of S1 toAS60034.1
Compliance
meets the Minimum Efficiency level requirements of AS/NZS1359.5-2004 to Table B2 where applicable
Mounting
available Foot, Foot and flange (C* and D types), Flange (C* and D types)
